Bathroom plumbing is one of the most of important aspects of maintaining your home. If it is done wrong, it can cause all sorts of problems, from damp patches to complete structural degradation. If it is done correctly no matter how busy, can run smoothly for many years.

When considering your bathroom plumbing solutions, price is a huge factor. If you live alone or with a partner, then you may be able to get away with the cheaper materials, because you’re unlikely to use the facilities as often as a large family. On the flip side, a large family will need a high-quality advanced solution to maintain the needs of constant use. Cheaper materials will work, but after a few years you may end up in a never-ending cycle of repairs, which will end up costing far more than installing a sturdy system, to begin with. You must also consider your plumbing as a selling point when putting your house on the market at a later date.

It is highly recommended that you hire a professional plumber to install or repair your bathroom plumbing, but it is something you can do yourself with great caution. Before starting, you’ll need to ensure you measure your facilities accurately and purchase all of the correct size pipes and fittings. You will also need to consider the hot water system, and that your tank is big enough to meet your family’s requirements. A small tank will cause the larger family to end up having cold showers if several people use it during the day.

You also need to remember that plumbing is not like putting up a flat pack table. Every bolt and fitting must be sealed with plumber’s tape and wound as tight as possible to prevent leakage. You don’t want your bathtub caving in through the ceiling.

If bathroom plumbing is beyond your DIY capabilities, there are many qualified plumbers like Plumber Holly Springs that can remodel, install, repair and evaluate your plumbing for you. If money is an issue, be sure to agree on a fixed price, rather than a quote or per hour rate.

Kitchen plumbing is one of the most important parts of the kitchen layout to your home. Most modern kitchens use a simple plumbing system that includes cold and hot water pipes, a waste disposal line adjoining to the sink, and a gas supply for cookers and other gas appliances.

Some more advanced kitchens include waste disposal units, water treatment and filter systems, ice and juice makers, dishwashers, and instant hot water. These are all usually connected to the sink’s plumbing system.

Generally, the visible DIY part of the plumbing system is located under the sink in a cupboard or base unit for easy access. The majority of blockages can be fixed here without further help. Gas is usually served nearby, although gas systems can vary a great deal. Its control usually occurs through the gas valve, placed at floor level, behind tiles, at the back of a cupboard or in a protected unit.

Below the sink in the easy access area are two small valves that control the on and off mechanism to the hot and cold water supply; this helps for repair, so you don’t get flooded. These shut off valves control the supply of hot and cold water to the taps, although some old buildings don’t have these installed. Flexible supply tubes aid the linkage between valves and the tap, as well as other kitchen appliances like dishwashers and washing machines that use extended springy plastic tubing to deliver water. Almost all connecting piping and bolts can be purchased from a DIY store.

Kitchen plumbing is rather straightforward at the visible level, and the installation of water-based appliances and sink units can be done without professional help, although if severe blockages occur it is best to contact a professional plumber, who has all the necessary tools and know-how to go deeper in to the system to locate the problem. Old homes often face maintenance issues due to general wear and tear, and the erosion and ceasing up of pipes.

Join the discussion

avatar
  Subscribe  
Notify of